news inbanner
Shenzhen home appliance assembly line strength manufacturer

Source:Non standard automation equipmentData:2020-04-20 11:23:31

With the continuous development of automatic production, assembly line has been widely used. According to the market demand, the future assembly line will develop in the direction of large-scale production, which will greatly expand the scope of applicati

With the continuous development of automatic production, assembly line has been widely used. According to the market demand, the future assembly line will develop in the direction of large-scale production, which will greatly expand the scope of application, improve the automatic sorting of materials, reduce energy consumption, reduce pollution and other aspects. Today's smart assembly line manufacturers give us an example.

Home appliance assembly line

1. Repair and maintenance methods of wire head motor of home appliance assembly line:

Do not fill the motor with water, or add diesel or liquid organic compounds to the motor, as this may cause motor failure due to edge damage. The maintenance method of the governor head is the same as that of the motor. Check other electrician's Manual for motor maintenance.

2. Repair and maintenance methods of home appliance assembly line chain:

After long-term operation, the chain may cause the original lubricating oil to heat up and volatilize, resulting in unbalance, noise increase, crawling and so on. At this time, open the tail of the sealing plate and lubricate the chain with butter or a little thick lubricating oil.

3. Repair and maintenance methods for reducer of assembly line of home appliance assembly line:

For the first use, the oil in the gearbox shall be drained within about three months, and the gearbox shall be cleaned with diesel or gasoline. After that, add new lubricating oil in the middle of the observation window. Pay attention to less lubrication every month. After that, change the oil once a year. Too much lubricating oil may cause the gearbox to heat up, and the motor load is too large, thus causing the motor protection switch to run out. Too little lubricating oil may cause gearbox to become hot, increase noise and cause gearbox suspension and scrap.