news inbanner
Why does the automatic assembly machine restart automatically?

Source:Non standard automation equipmentData:2020-04-20 11:32:46

According to the general assembly drawing of the automation equipment, first disassemble the components, and then disassemble the parts according to the hundred photos of the components to the accuracy of the screws and nuts. According to the first degree

The first is:

According to the general assembly drawing of the automation equipment, first disassemble the components, and then disassemble the parts according to the hundred photos of the components to the accuracy of the screws and nuts. According to the first degree followed by the order of text. And write the requirements to be done in each step and the precautions during installation. It's necessary to have both pictures and texts. You can't expect every installation personnel to be able to read and understand the text. Only with pictures can you have the truth.

Second species:

Why does the automatic assembly machine always restart automatically

Restart failure will not happen for no reason, right? What did you do before the restart? What hardware has been upgraded? You can talk about it in detail.

Automatic assembling machine

There may be some incompatibilities between the systems or programs. Press F8 to press the advanced option to release. Select "the latest correct configuration" and press F8 to enter the security mode to restore the system or reinstall the system.

Caused by excessive temperature of CPU or other hardware, incompatibility of memory and graphics card or failure.

The hard disk has a bad path. Please use the system's own functions or software to repair the disk, or format the hard disk to repartition and reinstall the system.

Power failure and voltage instability can also cause automatic restart.

Incompatible drivers can also cause a reboot to occur.

Main board parts failure.

Change the default automatic restart of the system: right click my computer / properties / advanced / settings in startup and fault recovery / remove the tick before "automatic restart" in system failure, and then press OK and apply to restart the computer.

If the above method is invalid, and you can't find the problem, it's recommended to repair it.

As a professional automation equipment manufacturer in China, aokeli can undertake the design and customized production of non-standard automation equipment in various fields at present!